[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.9.337-tegra (buildbrain@mobile-u64-5418-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 8 21:09:35 PDT 2023
[    0.000000] Boot CPU: AArch64 Processor [411fd073]
[    0.000000] OF: fdt:memory scan node memory@80000000, reg size 80,
[    0.000000] OF: fdt: - 80000000 ,  70000000
[    0.000000] OF: fdt: - f0200000 ,  185600000
[    0.000000] OF: fdt: - 275e00000 ,  200000
[    0.000000] OF: fdt: - 276600000 ,  200000
[    0.000000] OF: fdt: - 277000000 ,  200000
[    0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] Found tegra_fbmem2: 00800000@96088000
[    0.000000] Found lut_mem2: 00002008@96085000
[    0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
[    0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
[    0.000000] cma: Reserved 64 MiB at 0x00000000fc000000
[    0.000000] On node 0 totalpages: 2053117
[    0.000000]   DMA zone: 8192 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 521725 pages, LIFO batch:31
[    0.000000]   Normal zone: 24008 pages used for memmap
[    0.000000]   Normal zone: 1531392 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 24 pages/cpu s57816 r8192 d32296 u98304
[    0.000000] pcpu-alloc: s57816 r8192 d32296 u98304 alloc=24*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] CPU features: enabling workaround for Spectre-BHB
[    0.000000] CPU features: enabling workaround for ARM erratum 1742098
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2020917
[    0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2  video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= tegra_fbmem2=0x800000@0x96088000 lut_mem2=0x2008@0x96085000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix=_b boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 nv-auto-config 
[    0.000000] log_buf_len individual max cpu contribution: 32768 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 163840 bytes
[    0.000000] log_buf_len min size: 32768 bytes
[    0.000000] log_buf_len: 262144 bytes
[    0.000000] early log buf free: 29536(90%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Memory: 7269196K/8212468K available (15486K kernel code, 2982K rwdata, 6716K rodata, 8640K init, 614K bss, 189608K reserved, 753664K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000]       .text : 0x        (ptrval) - 0x        (ptrval)   ( 15488 KB)
[    0.000000]     .rodata : 0x        (ptrval) - 0x        (ptrval)   (  6784 KB)
[    0.000000]       .init : 0x        (ptrval) - 0x        (ptrval)   (  8640 KB)
[    0.000000]       .data : 0x        (ptrval) - 0x        (ptrval)   (  2983 KB)
[    0.000000]        .bss : 0x        (ptrval) - 0x        (ptrval)   (   615 KB)
[    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000]               0xffffffbf00000000 - 0xffffffbf07dc8000   (   125 MB actual)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc1f7200000   (  8050 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
[    0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns
[    0.001604] Console: colour dummy device 80x25
[    0.001609] console [tty0] enabled
[    0.001612] bootconsole [uart8250] disabled
[    0.001619] kmemleak: Kernel memory leak detector disabled
[    0.001629] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000)
[    0.001636] pid_max: default: 32768 minimum: 301
[    0.001970] Security Framework initialized
[    0.002138] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.002142] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.002745] ftrace: allocating 47296 entries in 185 pages
[    0.131673] sched-energy: Sched-energy-costs installed from DT
[    0.140691] ASID allocator initialised with 65536 entries
[    0.168060] tegra-id: chipid=21817.
[    0.168065] tegra-id: opt_subrevision=1.
[    0.168084] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0
[    0.168092] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts
[    0.168097] DTB Build time: Jun  8 2023 21:12:21
[    0.214726] CPU1: Booted secondary processor [4e0f0030]
[    0.246134] CPU2: Booted secondary processor [4e0f0030]
[    0.277150] CPU3: Booted secondary processor [411fd073]
[    0.309119] CPU4: Booted secondary processor [411fd073]
[    0.341104] CPU5: Booted secondary processor [411fd073]
[    0.341161] Brought up 6 CPUs
[    0.341166] SMP: Total of 6 processors activated.
[    0.341170] CPU features: detected feature: 32-bit EL0 Support
[    0.342875] CPU: All CPU(s) started at EL2
[    0.343032] alternatives: patching kernel code
[    0.345839] devtmpfs: initialized
[    0.385677] Initilizing CustomIPI irq domain
[    0.385829] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.385838] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.394787] pinctrl core: initialized pinctrl subsystem
[    0.395025] OS set in device tree is not L4T.
[    0.395184] regulator-dummy: no parameters
[    0.395317] Initializing plugin-manager
[    0.395375] Plugin module not found
[    0.395412] Plugin-manager status disabled
[    0.397482] NET: Registered protocol family 16
[    0.398512] pstore: using zlib compression
[    0.398524] console [pstore-1] enabled
[    0.398527] pstore: Registered ramoops as persistent store backend
[    0.398530] ramoops: attached 0x200000@0x275880000, ecc: 0/0
[    0.413164] cpuidle: using governor menu
[    0.414688] bpmp: waiting for handshake
[    0.414692] bpmp: handshake completed
[    0.414710] bpmp: synchronizing channels
[    0.414724] bpmp: channels synchronized
[    0.414727] bpmp: mail init ok
[    0.416851] arm-smmu 12000000.iommu: probing hardware configuration...
[    0.416856] arm-smmu 12000000.iommu: SMMUv2 with:
[    0.416860] arm-smmu 12000000.iommu: 	stage 1 translation
[    0.416863] arm-smmu 12000000.iommu: 	stage 2 translation
[    0.416866] arm-smmu 12000000.iommu: 	nested translation
[    0.416872] arm-smmu 12000000.iommu: 	stream matching with 128 register groups, mask 0x7f80
[    0.416878] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)!
[    0.416881] arm-smmu 12000000.iommu: 	64 context banks (0 stage-2 only)
[    0.416886] arm-smmu 12000000.iommu: 	Stage-1: 39-bit VA -> 48-bit IPA
[    0.416889] arm-smmu 12000000.iommu: 	Stage-2: 39-bit IPA -> 48-bit PA
[    0.419201] vdso: 2 pages (1 code @         (ptrval), 1 data @         (ptrval))
[    0.419214] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.421393] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
[    0.423524] Registering BPMP clocks...
[    0.423612] tegra_bpmp_clk_init: clock init ok (638 clks)
[    0.424596] Serial: AMBA PL011 UART driver
[    0.425742] tegra_powergate_init: DONE
[    0.425750] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts
[    0.425756] DTB Build time: Jun  8 2023 21:12:21
[    0.427943] Tegra reboot handler registered.
[    0.429545] tegra-pmc c360000.pmc: scratch reg offset dts data not present
[    0.429608] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0
[    0.429621] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET
[    0.429623] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1
[    0.429626] tegra-pmc: ### PMC reset status reg: 0x2d
[    0.429777] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[    0.429787] tegra-pmc c360000.pmc: IO padctrl driver initialized
[    0.430123] iommu: Adding device 3460000.sdhci to group 0
[    0.430831] iommu: Adding device 3400000.sdhci to group 1
[    0.431865] iommu: Adding device 3507000.ahci-sata to group 2
[    0.431876] arm-smmu: forcing sodev map for 3507000.ahci-sata
[    0.432346] iommu: Adding device 3160000.i2c to group 3
[    0.432783] iommu: Adding device c240000.i2c to group 4
[    0.433121] iommu: Adding device 3180000.i2c to group 5
[    0.433486] iommu: Adding device 3190000.i2c to group 6
[    0.433898] iommu: Adding device 31b0000.i2c to group 7
[    0.434241] iommu: Adding device 31c0000.i2c to group 8
[    0.434573] iommu: Adding device c250000.i2c to group 9
[    0.434908] iommu: Adding device 31e0000.i2c to group 10
[    0.436375] iommu: Adding device 3210000.spi to group 11
[    0.436711] iommu: Adding device c260000.spi to group 12
[    0.437041] iommu: Adding device 3240000.spi to group 13
[    0.437732] iommu: Adding device 3100000.serial to group 14
[    0.438083] iommu: Adding device 3110000.serial to group 15
[    0.438411] iommu: Adding device c280000.serial to group 16
[    0.438739] iommu: Adding device 3130000.serial to group 17
[    0.440110] iommu: Adding device 2490000.ether_qos to group 18
[    0.440121] arm-smmu: forcing sodev map for 2490000.ether_qos
[    0.440993] iommu: Adding device b000000.rtcpu to group 19
[    0.443259] iommu: Adding device 13e10000.host1x to group 20
[    0.443567] iommu: Adding device 13e10000.host1x:ctx0 to group 21
[    0.443871] iommu: Adding device 13e10000.host1x:ctx1 to group 22
[    0.444185] iommu: Adding device 13e10000.host1x:ctx2 to group 23
[    0.444484] iommu: Adding device 13e10000.host1x:ctx3 to group 24
[    0.444799] iommu: Adding device 13e10000.host1x:ctx4 to group 25
[    0.445118] iommu: Adding device 13e10000.host1x:ctx5 to group 26
[    0.445468] iommu: Adding device 13e10000.host1x:ctx6 to group 27
[    0.445778] iommu: Adding device 13e10000.host1x:ctx7 to group 28
[    0.446271] iommu: Adding device 150c0000.nvcsi to group 29
[    0.446934] iommu: Adding device 15700000.vi to group 30
[    0.447299] iommu: Adding device 15600000.isp to group 31
[    0.447521] iommu: Adding device 15200000.dc_common to group 32
[    0.447632] platform 15200000.dc_common: OF IOVA linear map 0x96088000 size (0x800000)
[    0.447667] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x2008)
[    0.448199] iommu: Adding device 15210000.nvdisplay to group 33
[    0.448565] iommu: Adding device 15340000.vic to group 34
[    0.448785] iommu: Adding device 154c0000.nvenc to group 35
[    0.449007] iommu: Adding device 15480000.nvdec to group 36
[    0.449372] iommu: Adding device 15380000.nvjpg to group 37
[    0.449587] iommu: Adding device 15500000.tsec to group 38
[    0.449796] iommu: Adding device 15100000.tsecb to group 39
[    0.450464] iommu: Adding device 15810000.se to group 40
[    0.450679] iommu: Adding device 15820000.se to group 41
[    0.450891] iommu: Adding device 15830000.se to group 42
[    0.451109] iommu: Adding device 15840000.se to group 43
[    0.451977] iommu: Adding device smmu_test to group 44
[    0.452582] mc: mapped MMIO address: 0x        (ptrval) -> 0x2c10000
[    0.452593] mc: mapped MMIO address: 0x        (ptrval) -> 0x2c20000
[    0.452603] mc: mapped MMIO address: 0x        (ptrval) -> 0x2c30000
[    0.452612] mc: mapped MMIO address: 0x        (ptrval) -> 0x2c40000
[    0.452622] mc: mapped MMIO address: 0x        (ptrval) -> 0x2c50000
[    0.452629] nv-tegra-mc 2c10000.mc: No mssnvlink node
[    0.452639] mc-err: mcerr ops are set to t18x
[    0.452790] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c
[    0.454078] iommu: Adding device 3530000.xhci to group 45
[    0.454092] arm-smmu: forcing sodev map for 3530000.xhci
[    0.454536] iommu: Adding device 3550000.xudc to group 46
[    0.454547] arm-smmu: forcing sodev map for 3550000.xudc
[    0.455254] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a
[    0.455261] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3
[    0.455266] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256
[    0.455915] iommu: Adding device 17000000.gp10b to group 47
[    0.456997] tegra-reset 5000000.clock: registered 193 resets.
[    0.459304] iommu: Adding device d000000.bpmp to group 48
[    0.459504] bpmp: ping status is 0
[    0.459604] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f
[    0.462126] bpmp d000000.bpmp: probe ok
[    0.465455] iommu: Adding device 2600000.dma to group 49
[    0.466355] gpio gpiochip0: gpio-line-names specifies 180 line names but there are 192 lines on the chip
[    0.466859] GPIO line 461 (camera-control-output-low) hogged as output/low
[    0.466890] GPIO line 456 (camera-control-output-low) hogged as output/low
[    0.466920] GPIO line 457 (camera-control-output-low) hogged as output/low
[    0.466949] GPIO line 426 (camera-control-output-low) hogged as output/low
[    0.466979] GPIO line 424 (wifi-enable) hogged as output/high
[    0.467007] GPIO line 445 (sdmmc-wake-support-input) hogged as input
[    0.467037] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low
[    0.467195] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio)
[    0.470785] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip
[    0.470899] GPIO line 315 (wifi-wake-ap) hogged as input
[    0.471033] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon)
[    0.472618] iommu: Adding device 10003000.pcie-controller to group 50
[    0.472633] arm-smmu: forcing sodev map for 10003000.pcie-controller
[    0.472966] iommu: Adding device sound to group 51
[    0.473371] iommu: Adding device 3510000.hda to group 52
[    0.480940] iommu: Adding device c1a0000.aon to group 53
[    0.481406] vdd-ac-bat: 5000 mV 
[    0.483053] vdd-1v8-ap: 1800 mV 
[    0.505626] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.508356] eventlib_kernel: keventlib is initialized, test id: 0
[    0.508555] SCSI subsystem initialized
[    0.508645] libata version 3.00 loaded.
[    0.508825] usbcore: registered new interface driver usbfs
[    0.508857] usbcore: registered new interface driver hub
[    0.508885] usbcore: registered new device driver usb
[    0.512167] GPIO line 241 (touch-rails) hogged as output/high
[    0.512574] GPIO line 242 (touch-rails) hogged as output/high
[    0.512758] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539)
[    0.514084] GPIO line 228 (lcd-bias-rails) hogged as output/high
[    0.514208] gpiochip_setup_dev: registered GPIOs 224 to 239 on device: gpiochip3 (tca9539)
[    0.524171] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8
[    0.528838] vddio-ddr: at 1125 mV 
[    0.532687] avdd_dsi_csi: 1200 mV 
[    0.537117] vdd-1v8: 1800 mV 
[    0.541123] vdd-3v3-sys: 3300 mV 
[    0.541976] spmic-ldo0: at 1800 mV 
[    0.542677] spmic-ldo1: at 800 mV 
[    0.545153] vddio-3v3: 3300 mV 
[    0.545876] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV 
[    0.549121] vdd-rtc: at 800 mV 
[    0.549734] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV 
[    0.553119] spmic-ldo6: at 1500 mV 
[    0.557118] vdd-pex-1v00: 1000 mV 
[    0.557744] dvdd-pex: 1000 mV 
[    0.560069] GPIO line 221 (spmic_gpio_input) hogged as input
[    0.560222] GPIO line 222 (spmic_gpio_input) hogged as input
[    0.560371] gpiochip_setup_dev: registered GPIOs 216 to 223 on device: gpiochip4 (max77620-gpio)
[    0.560548] max77620 4-003c: max77620 probe successful
[    0.560936] media: Linux media interface: v0.10
[    0.560964] Linux video capture interface: v2.00
[    0.563443] pps_core: LinuxPPS API ver. 1 registered
[    0.563447] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.563463] PTP clock support registered
[    0.563662] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated
[    0.563871] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec
[    0.563889] tegra_wdt_t18x 30c0000.watchdog: Registered successfully
[    0.565245] trusty trusty: trusty version: Built: 21:09:01 Jun  8 2023 
[    0.565262] trusty trusty: selected api version: 3 (requested 3)
[    0.566092] Advanced Linux Sound Architecture Driver Initialized.
[    0.566442] Bluetooth: Core ver 2.22
[    0.566472] NET: Registered protocol family 31
[    0.566475] Bluetooth: HCI device and connection manager initialized
[    0.566482] Bluetooth: HCI socket layer initialized
[    0.566486] Bluetooth: L2CAP socket layer initialized
[    0.566500] Bluetooth: SCO socket layer initialized
[    0.567303] en-vdd-sd: 3300 mV 
[    0.568043] en-vdd-cam: 1800 mV 
[    0.572690] vdd-hdmi: 5000 mV 
[    0.572982] vdd-usb0-5v: 5000 mV 
[    0.573272] vdd-usb1-5v: 5000 mV 
[    0.576708] en-vdd-ts-1v8: 1800 mV 
[    0.580687] en-vdd-ts-hv-3v3: 3300 mV 
[    0.581352] en-vdd-disp-3v3: 3300 mV 
[    0.582009] en-mdm-pwr-3v7: 3700 mV 
[    0.582668] en-vdd-disp-1v8: 1800 mV 
[    0.583332] en-vdd-cam-hv-2v8: 2800 mV 
[    0.584004] en-vdd-cam-1v2: 1200 mV 
[    0.584699] vdd-fan: 5000 mV 
[    0.584950] vdd-3v3: 3300 mV 
[    0.585865] dis-vdd-1v2: 1200 mV 
[    0.586124] en-vdd-vcm-2v8: 2800 mV 
[    0.586827] vdd-usb2-5v: 5000 mV 
[    0.587103] vdd-sys-bl: 3300 mV 
[    0.587814] en-vdd-sys: 1200 mV 
[    0.590024] camchar: rtcpu character device driver loaded
[    0.590553] gpio tegra-gpio wake53 for gpio=159(X:7)
[    0.592265] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:2
[    0.593185] clocksource: Switched to clocksource arch_sys_counter
[    0.615689] VFS: Disk quotas dquot_6.6.0
[    0.615767] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.616028] nvmap_heap_init: nvmap_heap_init: created heap block cache
[    0.616538] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000
[    0.616648] cma: enabled page replacement for spfn=c6000, epfn=f0000
[    0.616652] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
[    0.616661] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc
[    0.616665] nvmap_page_pool_init: Total RAM pages: 2005715
[    0.616668] nvmap_page_pool_init: nvmap page pool size: 250714 pages (979 MB)
[    0.616719] nvmap_background_zero_thread: PP zeroing thread starting.
[    0.617213] misc nvmap: created heap vpr base 0x        (ptrval) size (688128KiB)
[    0.619150] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels
[    0.624694] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm
[    0.624920] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm
[    0.625389] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[    0.625464] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[    0.625568] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra
[    0.625670] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
[    0.625823] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die
[    0.626025] la/ptsa driver initialized.
[    0.626033] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz
[    0.626036] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB
[    0.626349] NET: Registered protocol family 2
[    0.626428] IP idents hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.641363] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.641675] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.642282] TCP: Hash tables configured (established 65536 bind 65536)
[    0.642333] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.642450] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.642787] NET: Registered protocol family 1
[    0.643156] RPC: Registered named UNIX socket transport module.
[    0.643159] RPC: Registered udp transport module.
[    0.643161] RPC: Registered tcp transport module.
[    0.643164] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.643169] PCI: CLS 0 bytes, default 64
[    0.643289] Trying to unpack rootfs image as initramfs...
[    0.855892] Freeing initrd memory: 7068K
[    0.871797] host1x 13e10000.host1x: initialized
[    0.873195] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.875300] audit: initializing netlink subsys (disabled)
[    0.875334] audit: type=2000 audit(0.760:1): initialized
[    0.875721] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    0.882240] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.883206] ntfs: driver 2.1.32 [Flags: R/W].
[    0.883720] 9p: Installing v9fs 9p2000 file system support
[    0.885762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[    0.885822] io scheduler noop registered
[    0.886033] io scheduler cfq registered (default)
[    0.889405] gic 2a41000.agic-controller: GIC IRQ controller registered
[    0.903948] iommu: Adding device aconnect@2a41000:adsp_audio to group 54
[    0.930977] iommu: Adding device 2993000.adsp to group 55
[    0.932008] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
[    0.934518] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled
[    0.937690] tegra-pwm 3280000.pwm: PWM clk can sleep in ops
[    0.938814] tegra-pwm 3290000.pwm: PWM clk can sleep in ops
[    0.939859] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
[    0.940893] tegra-pwm c340000.pwm: PWM clk can sleep in ops
[    0.943102] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration
[    0.944039] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails
[    0.944376] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes
[    0.944434] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[    0.944539] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs
[    0.944544] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500
[    0.946741] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes
[    0.948002] tsec 15500000.tsec: initialized
[    0.949308] tsec 15100000.tsecb: initialized
[    0.952801] nvdec 15480000.nvdec: initialized
[    0.959104] falcon 15340000.vic: initialized
[    0.960432] falcon 154c0000.nvenc: initialized
[    0.961665] falcon 15380000.nvjpg: initialized
[    0.963587] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56)
[    0.964907] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57)
[    0.966432] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58)
[    0.967726] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59)
[    0.969005] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60)
[    0.970298] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61)
[    0.971641] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62)
[    0.972968] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63)
[    0.976091] tegradccommon 15200000.dc_common: host1x channel mapped
[    0.976099] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated
[    0.976132] tegradccommon 15200000.dc_common: dma mapping done
[    0.976285] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=391
[    0.976362] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0.
[    0.976576] tegra_cec 3960000.tegra_cec: Enable clock result: 0.
[    0.976591] tegra_cec 3960000.tegra_cec: tegra_cec_init started
[    0.976740] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0
[    0.976744] tegra_cec 3960000.tegra_cec: probed
[    0.976815] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1
[    0.976859] generic_infoframe_type: 0x87
[    0.976952] tegradc 15210000.nvdisplay: DT parsed successfully
[    0.976978] tegradc 15210000.nvdisplay: Display dc.        (ptrval) registered with id=0
[    0.984745] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s
[    0.984749] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz
[    0.984752] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz
[    0.984929] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1
[    0.984934] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1
[    0.986218] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937
[    0.988930] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board
[    0.988934] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed
[    0.991520] tegradc 15210000.nvdisplay: probed
[    0.992427] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels
[    0.993049] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled
[    0.993077] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized
[    0.993891] kfuse 3830000.kfuse: initialized
[    0.995307] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
[    0.998135] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.000475] console [ttyS0] disabled
[    1.000518] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra
[    1.000564] console [ttyS0] enabled
[    1.001899] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART
[    1.002826] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART
[    1.003010] serial-tegra 3130000.serial: RX in PIO mode
[    1.003036] Console: switching to colour frame buffer device 240x67
[    1.003125] tegradc 15210000.nvdisplay: fb registered
[    1.003274] gpio tegra-gpio wake21 for gpio=121(P:1)
[    1.003862] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART
[    1.004001] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
[    1.004064] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
[    1.004123] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd
[    1.004963] [drm] Initialized
[    1.011750] Parent Clock set for DC plld2
[    1.012244] brd: module loaded
[    1.015694] loop: module loaded
[    1.015739] tegra_profiler: version: 1.145, samples/io: 49/28
[    1.015817] tegra_profiler: auth: init
[    1.016151] nct1008_nct72 7-004c: starting parse dt
[    1.016256] nct1008_nct72 7-004c: !!!Found deprecated property!!!
[    1.016262] nct1008_nct72 7-004c: success parsing dt
[    1.016366] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail
[    1.016746] THERMAL EST: found 3 subdevs
[    1.016750] THERMAL EST num_resources: 0
[    1.016754] [THERMAL EST subdev 0]
[    1.016759] [THERMAL EST subdev 1]
[    1.016762] [THERMAL EST subdev 2]
[    1.017015] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est
[    1.017017] THERMAL EST: thz register success.
[    1.017101] THERMAL EST: end of probe, return err: 0
[    1.017821] sd: No Scsi addr parsed to reserve index
[    1.017847] hisi_sas: driver version v1.6
[    1.021493] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
[    1.021501] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst 
[    1.022228] scsi host0: tegra_ahci
[    1.022623] scsi host1: tegra_ahci
[    1.022761] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24
[    1.022764] ata2: DUMMY
[    1.028740] tun: Universal TUN/TAP device driver, 1.6
[    1.028744] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.029489] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.029492] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.029532] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    1.029535] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.029567] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.029570] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.029601] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[    1.029604] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    1.041234] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2)
[    1.043738] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg
[    1.044227] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c6 ab d
[    1.044257] Using phyrst_lpmode = 0 from DT
[    1.044621] bcm54xx_low_power_mode(): put phy in iddq-lp mode
[    1.046863] PPP generic driver version 2.4.2
[    1.046982] PPP BSD Compression module registered
[    1.046986] PPP Deflate Compression module registered
[    1.047000] PPP MPPE Compression module registered
[    1.047004] NET: Registered protocol family 24
[    1.047068] usbcore: registered new interface driver r8152
[    1.047099] usbcore: registered new interface driver asix
[    1.047129] usbcore: registered new interface driver ax88179_178a
[    1.047154] usbcore: registered new interface driver cdc_ether
[    1.047183] usbcore: registered new interface driver net1080
[    1.047210] usbcore: registered new interface driver cdc_subset
[    1.047239] usbcore: registered new interface driver zaurus
[    1.047282] usbcore: registered new interface driver cdc_ncm
[    1.047391] VFIO - User Level meta-driver version: 0.3
[    1.048265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.048277] ehci-pci: EHCI PCI platform driver
[    1.048308] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.048315] ohci-pci: OHCI PCI platform driver
[    1.048348] ohci-platform: OHCI generic platform driver
[    1.051834] nct1008_nct72 7-004c: LOC shutdown limit 107
[    1.052177] nct1008_nct72 7-004c: EXT shutdown limit 107
[    1.053512] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP
[    1.055196] tegra-xusb 3530000.xhci: extcon 0:         (ptrval) id
[    1.056021] usbcore: registered new interface driver uas
[    1.056061] usbcore: registered new interface driver usb-storage
[    1.056128] usbcore: registered new interface driver usbserial
[    1.057170] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release
[    1.060773] tegra-xudc-new 3550000.xudc: device count: 1
[    1.062072] tegra-xudc-new 3550000.xudc: vbus state: 0
[    1.062091] tegra-xudc-new 3550000.xudc: entering ELPG
[    1.063415] tegra-xudc-new 3550000.xudc: entering ELPG done
[    1.063570] mousedev: PS/2 mouse device common for all mice
[    1.063622] usbcore: registered new interface driver xpad
[    1.077089] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m
[    1.077570] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL.
[    1.077579] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL.
[    1.085447] tegra-xusb 3530000.xhci: xHCI Host Controller
[    1.085465] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1
[    1.086179] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810
[    1.086209] tegra-xusb 3530000.xhci: irq 71, io mem 0x03530000
[    1.086342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.086347] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.086351] usb usb1: Product: xHCI Host Controller
[    1.086354] usb usb1: Manufacturer: Linux 4.9.337-tegra xhci-hcd
[    1.086357] usb usb1: SerialNumber: 3530000.xhci
[    1.086685] hub 1-0:1.0: USB hub found
[    1.086716] hub 1-0:1.0: 4 ports detected
[    1.087049] tegra-xusb 3530000.xhci: xHCI Host Controller
[    1.087057] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2
[    1.087183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.087187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.087190] usb usb2: Product: xHCI Host Controller
[    1.087193] usb usb2: Manufacturer: Linux 4.9.337-tegra xhci-hcd
[    1.087196] usb usb2: SerialNumber: 3530000.xhci
[    1.087473] hub 2-0:1.0: USB hub found
[    1.087496] hub 2-0:1.0: 3 ports detected
[    1.087981] Wake76 for irq=199
[    1.087984] Wake77 for irq=199
[    1.087986] Wake78 for irq=199
[    1.087988] Wake79 for irq=199
[    1.087990] Wake80 for irq=199
[    1.087992] Wake81 for irq=199
[    1.087994] Wake82 for irq=199
[    1.088018] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0
[    1.088022] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0
[    1.088090] nct1008_nct72 7-004c: initial LOC temp: 34000 
[    1.088399] nct1008_nct72 7-004c: initial EXT temp: 35500 
[    1.089004] nct1008_nct72 7-004c: hi_b:-11, lo_b:0
[    1.089291] gpio tegra-gpio-aon wake35 for gpio=16(V:0)
[    1.089472] nct1008_nct72 7-004c: nct1008_probe: initialized
[    1.103722] extcon-disp-state external-connection:disp-state: cable 47 state 1
[    1.103725] Extcon AUX1(HDMI) enable
[    1.105329] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:2
[    1.169611] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
[    1.170755] Wake73 for irq=42
[    1.171996] rtc rtc1: alarm rtc device
[    1.172007] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1
[    1.172021] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
[    1.172186] i2c /dev entries driver
[    1.174163] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[    1.179376] parse_throttle_dt_data: Num cap clks = 4
[    1.179380] parse_throttle_dt_data: clk=mcpu type=1
[    1.179383] parse_throttle_dt_data: clk=bcpu type=2
[    1.179390] parse_throttle_dt_data: clk=gpu type=4
[    1.179393] parse_throttle_dt_data: clk=emc type=3
[    1.180201] tegra_throttle_probe: probe successful. #cdevs=4
[    1.180824] FAN dev name: pwm-fan
[    1.180886] FAN:gpio request success.
[    1.180894] FAN: can't find tach_gpio
[    1.180910] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[    1.181130] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed
[    1.181170] pwm_fan_driver pwm-fan: tach period: 1000
[    1.181746] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[    1.181751] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[    1.181755] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[    1.181759] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[    1.181763] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[    1.181767] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[    1.181771] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[    1.181774] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[    1.181778] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[    1.181782] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[    1.182348] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized
[    1.183368] device-mapper: uevent: version 1.0.3
[    1.183697] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.183955] CPU EMC frequency mapping table: from device tree
[    1.188180] cpufreq: platform driver Initialization: pass
[    1.188765] cpuidle: Initializing cpuidle driver init for Denver cluster
[    1.188880] cpuidle: Initializing cpuidle driver init for A57 cluster
[    1.189818] sdhci: Secure Digital Host Controller Interface driver
[    1.189820] sdhci: Copyright(c) Pierre Ossman
[    1.189821] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.191032] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful
[    1.192801] CMDQ: cmdq_platfm_init successful
[    1.193800] CQE: CMD_TIMING bit set for R1B DCMD
[    1.196128] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful
[    1.201251] sdhci-tegra 3400000.sdhci: Got CD GPIO
[    1.201315] sdhci-tegra 3400000.sdhci: Got WP GPIO
[    1.201947] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful
[    1.203609] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 258
[    1.207101] tegra-se-nvhost 15810000.se: initialized
[    1.208244] tegra-se-nvhost 15810000.se: tegra_se_probe: complete
[    1.208834] tegra-se-nvhost 15820000.se: initialized
[    1.209810] tegra-se-nvhost 15820000.se: tegra_se_probe: complete
[    1.210405] tegra-se-nvhost 15830000.se: initialized
[    1.211164] tegra-se-nvhost 15830000.se: tegra_se_probe: complete
[    1.211690] tegra-se-nvhost 15840000.se: initialized
[    1.212568] tegra-se-nvhost 15840000.se: tegra_se_probe: complete
[    1.213332] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete
[    1.213471] hidraw: raw HID events driver (C) Jiri Kosina
[    1.215651] usbcore: registered new interface driver usbhid
[    1.215653] usbhid: USB HID core driver
[    1.218743] ashmem: initialized
[    1.221355] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000
[    1.223449] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192
[    1.223710] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900
[    1.223854] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200
[    1.224087] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300
[    1.224192] tegra186-cam-rtcpu b000000.rtcpu: no priority specified, using 99 as default
[    1.225063] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480
[    1.225230] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80
[    1.225280] tegra-capture-ivc ivc-b000000.rtcpu:ivccontrol@52c0: no priority specified, using 99 as default
[    1.225335] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680
[    1.225386] tegra-capture-ivc ivc-b000000.rtcpu:ivccapture@72c0: no priority specified, using 99 as default
[    1.225434] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80
[    1.225543] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80
[    1.225870] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52)
[    1.225872] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful
[    1.226358] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3
[    1.227944] tegra_aon c1a0000.aon: tegra aon driver probe OK
[    1.228375] tegra186-aondbg aondbg: aondbg driver probe() OK
[    1.228752] register_ari_mca_banks: Registered MCA ROC:IOB
[    1.229029] register_ari_mca_banks: Registered MCA ROC:CCE
[    1.229761] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.229764] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000
[    1.229766] tegra18-bridge 2390000.axi2apb: bridge probed OK
[    1.229816] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.229818] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000
[    1.229820] tegra18-bridge 23a0000.axi2apb: bridge probed OK
[    1.229871] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.229873] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000
[    1.229875] tegra18-bridge 23b0000.axi2apb: bridge probed OK
[    1.229931] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.229933] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000
[    1.229935] tegra18-bridge 23c0000.axi2apb: bridge probed OK
[    1.229984] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.229986] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000
[    1.229988] tegra18-bridge 23d0000.axi2apb: bridge probed OK
[    1.230034] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.230039] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000
[    1.230041] tegra18-bridge 2100000.axip2p: bridge probed OK
[    1.230088] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.230092] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000
[    1.230094] tegra18-bridge 2110000.axip2p: bridge probed OK
[    1.230141] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.230145] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000
[    1.230147] tegra18-bridge 2120000.axip2p: bridge probed OK
[    1.230198] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.230202] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000
[    1.230204] tegra18-bridge 2130000.axip2p: bridge probed OK
[    1.230251] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.230254] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000
[    1.230255] tegra18-bridge 2140000.axip2p: bridge probed OK
[    1.230312] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.230317] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000
[    1.230319] tegra18-bridge 2150000.axip2p: bridge probed OK
[    1.230365] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.230370] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000
[    1.230372] tegra18-bridge 2160000.axip2p: bridge probed OK
[    1.230420] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.230425] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000
[    1.230427] tegra18-bridge 2170000.axip2p: bridge probed OK
[    1.230473] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.230478] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000
[    1.230480] tegra18-bridge 2180000.axip2p: bridge probed OK
[    1.230526] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
[    1.230530] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000
[    1.230532] tegra18-bridge 2190000.axip2p: bridge probed OK
[    1.230594] **** A57 ECC: Enabled
[    1.230596] tegra18_a57_serr_init: on CPU 5 a A57 Core
[    1.230658] tegra18x_actmon d230000.actmon: in actmon_register()...
[    1.231103] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all
[    1.231522] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available
[    1.231639] denver_knobs_init:MTS_VERSION:66340021
[    1.234329] nvpmodel: initialized successfully
[    1.235263] trusty-virtio trusty:virtio: initializing
[    1.235364] trusty_ipc virtio0: vring0: va(pa)          (ptrval)(0) qsz 32 notifyid 1
[    1.235371] trusty_ipc virtio0: vring1: va(pa)          (ptrval)(0) qsz 32 notifyid 2
[    1.235438] trusty-virtio trusty:virtio: initializing done
[    1.235521] trusty_ipc virtio0: is online
[    1.236743] usbcore: registered new interface driver snd-usb-audio
[    1.236956] tegradc 15210000.nvdisplay: blank - powerdown
[    1.241169] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr
[    1.241482] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr
[    1.257306] gpio tegra-gpio wake71 for gpio=125(P:5)
[    1.257358] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr
[    1.259578] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0
[    1.260227] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1
[    1.277451] extcon-disp-state external-connection:disp-state: cable 47 state 0
[    1.277454] Extcon AUX1(HDMI) disable
[    1.293665] OPE platform probe
[    1.293738] OPE platform probe successful
[    1.300667] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd
[    1.300763] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
[    1.301216] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd
[    1.307654] tegradc 15210000.nvdisplay: unblank
[    1.308234] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
[    1.308315] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
[    1.308395] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd
[    1.309640] Parent Clock set for DC plld2
[    1.313183] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m
[    1.314601] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID.
[    1.326570] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1
[    1.335642] ata1: SATA link down (SStatus 0 SControl 300)
[    1.340411] mmc0: periodic cache flush enabled
[    1.340420] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    1.340944] mmcblk0: mmc0:0001 032G34 29.1 GiB 
[    1.345083] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB
[    1.349110] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
[    1.349213] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
[    1.349280] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
[    1.349348] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
[    1.349415] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
[    1.349478] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
[    1.349545] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
[    1.349610] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
[    1.349675] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
[    1.349745] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
[    1.349811] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok
[    1.349880] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok
[    1.349945] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok
[    1.350011] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok
[    1.350062] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB
[    1.350083] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok
[    1.350199] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok
[    1.350210] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB
[    1.350270] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok
[    1.350349] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok
[    1.350423] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok
[    1.350475] extcon-disp-state external-connection:disp-state: cable 47 state 1
[    1.350495] Extcon AUX1(HDMI) enable
[    1.350502] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok
[    1.353854] usb 1-1: new low-speed USB device number 2 using tegra-xusb
[    1.360924]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
[    1.364727] tegradc 15210000.nvdisplay: sync windows ret = 247
[    1.371168] tegra-pcie 10003000.pcie-controller: link 0 down, retrying
[    1.375134] u32 classifier
[    1.375135]     Actions configured
[    1.375192] Initializing XFRM netlink socket
[    1.375736] NET: Registered protocol family 10
[    1.376329] NET: Registered protocol family 17
[    1.376337] NET: Registered protocol family 15
[    1.376397] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.376440] Bluetooth: RFCOMM socket layer initialized
[    1.376447] Bluetooth: RFCOMM ver 1.11
[    1.376450] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.376454] Bluetooth: HIDP socket layer initialized
[    1.376468] 9pnet: Installing 9P2000 support
[    1.376502] Key type dns_resolver registered
[    1.377164] Registered cp15_barrier emulation handler
[    1.378181] Registered setend emulation handler
[    1.382401] usb 1-1: New USB device found, idVendor=1c4f, idProduct=0034
[    1.382404] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.382407] usb 1-1: Product: Usb Mouse
[    1.382408] usb 1-1: Manufacturer: SIGMACHIP
[    1.386401] registered taskstats version 1
[    1.387212] extcon-disp-state external-connection:disp-state: cable 51 state 1
[    1.387215] Extcon HDMI: HPD enabled
[    1.387227] tegradc 15210000.nvdisplay: hdmi: plugged
[    1.391018] input: SIGMACHIP Usb Mouse as /devices/3530000.xhci/usb1/1-1/1-1:1.0/0003:1C4F:0034.0001/input/input2
[    1.391190] isp 15600000.isp: initialized
[    1.391334] hid-generic 0003:1C4F:0034.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-3530000.xhci-1/input0
[    1.395821] nvcsi 150c0000.nvcsi: initialized
[    1.398490] tegra-vi4 15700000.vi: using default number of vi channels,15
[    1.400031] Wake83 for irq=51
[    1.400109] gpio tegra-gpio-aon wake29 for gpio=56(FF:0)
[    1.400186] gpio tegra-gpio-aon wake67 for gpio=57(FF:1)
[    1.400262] gpio tegra-gpio-aon wake68 for gpio=58(FF:2)
[    1.400394] input: gpio-keys as /devices/gpio-keys/input/input3
[    1.402400] tegra-vi4 15700000.vi: initialized
[    1.403200] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@0/endpoint.
[    1.403204] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@1/endpoint.
[    1.434600] tegra_rtc c2a0000.rtc: setting system clock to 2023-09-13 03:00:07 UTC (1694574007)
[    1.435977] mmcblk mmc0:0001: Card claimed for testing.
[    1.464600] bpmp: mounted debugfs mirror
[    1.465866] bwmgr: missing cdev-type property
[    1.471511] ALSA device list:
[    1.471516]   #0: tegra-hda at 0x3518000 irq 384
[    1.471518]   #1: tegra-snd-t186ref-mobile-rt565x
[    1.474076] Freeing unused kernel memory: 8640K
[    1.482909] mmc1: hw tuning done ...
[    1.487017] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    1.497830] Root device found: mmcblk0p1
[    1.498917] Found dev node: /dev/mmcblk0p1
[    1.509183] usb 1-2: new low-speed USB device number 3 using tegra-xusb
[    1.519806] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    1.521581] Rootfs mounted over mmcblk0p1
[    1.536634] usb 1-2: New USB device found, idVendor=1c4f, idProduct=0002
[    1.536638] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.536641] usb 1-2: Product: USB Keyboard
[    1.536643] usb 1-2: Manufacturer: SIGMACHIP
[    1.540489] input: SIGMACHIP USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:1C4F:0002.0002/input/input4
[    1.548392] Switching from initrd to actual rootfs
[    1.589342] usb usb2: usb_suspend_both: status 0
[    1.597526] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-3530000.xhci-2/input0
[    1.600453] input: SIGMACHIP USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.1/0003:1C4F:0002.0003/input/input5
[    1.657362] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-3530000.xhci-2/input1
[    1.673256] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.682191] cgroup: cgroup2: unknown option "nsdelegate"
[    1.699992] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    1.700760] systemd[1]: Detected architecture arm64.
[    1.719121] systemd[1]: Set hostname to <ubuntu>.
[    1.777170] tegra-pcie 10003000.pcie-controller: link 0 down, retrying
[    1.811860] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    1.811868] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    1.941244] random: systemd: uninitialized urandom read (16 bytes read)
[    1.941275] systemd[1]: Reached target Swap.
[    1.941453] random: systemd: uninitialized urandom read (16 bytes read)
[    1.941473] systemd[1]: Reached target User and Group Name Lookups.
[    1.941632] random: systemd: uninitialized urandom read (16 bytes read)
[    1.942765] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.942812] systemd[1]: Reached target Mounting snaps.
[    1.942840] systemd[1]: Reached target Mounted snaps.
[    1.986035] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[    1.997203] tegra_cec 3960000.tegra_cec: physical address: 10:00.
[    2.062176] tegra_cec 3960000.tegra_cec: Sent <Text View On> res: -113.
[    2.062181] tegra_cec 3960000.tegra_cec: tegra_cec_init Done.
[    2.190620] tegra-pcie 10003000.pcie-controller: link 0 down, retrying
[    2.192643] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring
[    2.220644] systemd-journald[2243]: Received request to flush runtime journal from PID 1
[    2.606828] tegra-pcie 10003000.pcie-controller: link 2 down, retrying
[    2.706630] using random self ethernet address
[    2.711250] using random host ethernet address
[    2.968228] random: systemd: uninitialized urandom read (16 bytes read)
[    2.970626] random: systemd-journal: uninitialized urandom read (16 bytes read)
[    3.004667] random: crng init done
[    3.009204] random: 163 urandom warning(s) missed due to ratelimiting
[    3.013178] tegra-pcie 10003000.pcie-controller: link 2 down, retrying
[    3.279906] Mass Storage Function, version: 2009/09/11
[    3.279912] LUN: removable file: (no medium)
[    3.292621] using random self ethernet address
[    3.314463] using random host ethernet address
[    3.343250] usb 1-1: USB disconnect, device number 2
[    3.371000] rndis0: HOST MAC ce:4a:e7:4b:79:64
[    3.371634] rndis0: MAC ce:4a:e7:4b:79:65
[    3.372719] usb0: HOST MAC ce:4a:e7:4b:79:66
[    3.372749] usb0: MAC ce:4a:e7:4b:79:67
[    3.372767] tegra-xudc-new 3550000.xudc: exiting ELPG
[    3.382653] tegra-xudc-new 3550000.xudc: exiting ELPG done
[    3.382672] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled
[    3.382705] tegra-xudc-new 3550000.xudc: entering ELPG
[    3.383945] tegra-xudc-new 3550000.xudc: entering ELPG done
[    3.383961] tegra-xudc-new 3550000.xudc: exiting ELPG
[    3.386386] tegra-xudc-new 3550000.xudc: exiting ELPG done
[    3.386401] tegra-xudc-new 3550000.xudc: entering ELPG
[    3.389924] l4tbr0: port 1(rndis0) entered blocking state
[    3.389929] l4tbr0: port 1(rndis0) entered disabled state
[    3.390101] device rndis0 entered promiscuous mode
[    3.391994] tegra-xudc-new 3550000.xudc: entering ELPG done
[    3.400162] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
[    3.409178] tegra-pcie 10003000.pcie-controller: link 2 down, retrying
[    3.411211] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring
[    3.416400] l4tbr0: port 2(usb0) entered blocking state
[    3.416405] l4tbr0: port 2(usb0) entered disabled state
[    3.416563] device usb0 entered promiscuous mode
[    3.450776] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[    3.614841] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected
[    3.615138] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails
[    3.639682] gpio tegra-gpio-aon wake30 for gpio=60(FF:4)
[    3.677206] usb 1-1: new low-speed USB device number 4 using tegra-xusb
[    3.678043] bcpu-throttle-alert cooling device registered.
[    3.678295] mcpu-throttle-alert cooling device registered.
[    3.678866] dhd_module_init in
[    3.678945] found wifi platform device bcmdhd_wlan
[    3.680381] wifi_platform_get_country_code_map: could not get country_code_map
[    3.680386] wifi_plat_dev_drv_probe:platform country code map is not available
[    3.680400] Power-up adapter 'DHD generic adapter'
[    3.680407] wifi_platform_set_power = 1
[    3.681564] gpu-throttle-alert cooling device registered.
[    3.704009] usb 1-1: New USB device found, idVendor=1c4f, idProduct=0034
[    3.704015] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.704018] usb 1-1: Product: Usb Mouse
[    3.704020] usb 1-1: Manufacturer: SIGMACHIP
[    3.707667] input: SIGMACHIP Usb Mouse as /devices/3530000.xhci/usb1/1-1/1-1:1.0/0003:1C4F:0034.0004/input/input6
[    3.708105] hid-generic 0003:1C4F:0034.0004: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-3530000.xhci-1/input0
[    3.885194] wifi_platform_bus_enumerate device present 1
[    3.912704] wifi_platform_bus_enumerate device present 0
[    3.916363] F1 signature read @0x18000000=0x17214354
[    3.918148] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.965213] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
[    3.988246] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[    3.988449] wifi_platform_get_mac_addr
[    4.001225] ids dhd_log_netlink_init
[    4.005986] gpio tegra-gpio wake18 for gpio=101(M:5)
[    4.007933] net eth0: get_configure_l3v4_filter -->
[    4.008383] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.013618]  wl_event_handler : 
[    4.013622] tsk Enter, tsk = 0x00000000d463cc08
[    4.013642] wl_create_event_handler(): thread:wl_event_handler:1140 started
[    4.016948] dhd_attach(): thread:dhd_watchdog_thread:1145 started
[    4.018979] dhd_attach(): thread:dhd_dpc:1148 started
[    4.022527] dhd_attach(): thread:dhd_rxf:1149 started
[    4.022536] dhd_deferred_work_init: work queue initialized 
[    4.080423] 
               Dongle Host Driver, version 1.201.82 (r)
               Compiled from 
[    4.086499] Register interface [wlan0]  MAC: 00:04:4b:c6:ab:0b

[    4.086506] dhd_prot_ioctl : bus is down. we have nothing to do
[    4.088677] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65
[    4.091728] wifi_platform_set_power = 0
[    4.109384] CPU1: shutdown
[    4.112205] psci: CPU1 killed (polled 0 ms)
[    4.181654] CPU2: shutdown
[    4.184389] psci: CPU2 killed (polled 0 ms)
[    4.438297] zram: Added device: zram0
[    4.439171] zram: Added device: zram1
[    4.454231] zram: Added device: zram2
[    4.461818] zram: Added device: zram3
[    4.523420] zram0: detected capacity change from 0 to 1028939776
[    4.547187] Adding 1004820k swap on /dev/zram0.  Priority:5 extents:1 across:1004820k SS
[    4.556136] zram1: detected capacity change from 0 to 1028939776
[    4.572637] Adding 1004820k swap on /dev/zram1.  Priority:5 extents:1 across:1004820k SS
[    4.576669] zram2: detected capacity change from 0 to 1028939776
[    4.598444] Adding 1004820k swap on /dev/zram2.  Priority:5 extents:1 across:1004820k SS
[    4.603089] zram3: detected capacity change from 0 to 1028939776
[    4.619721] Adding 1004820k swap on /dev/zram3.  Priority:5 extents:1 across:1004820k SS
[    4.935360] Bridge firewalling registered
[    4.960729] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    5.160095] Netfilter messages via NETLINK v0.30.
[    5.162439] ctnetlink v0.93: registering with nfnetlink.
[    5.299644] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[    5.536171] tegradc 15210000.nvdisplay: unblank
[    6.100885] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.101005] 
               
               Dongle Host Driver, version 1.201.82 (r)
               Compiled from 
[    6.101014] wl_android_wifi_on in
[    6.101019] wifi_platform_set_power = 1
[    6.407083] fuse init (API version 7.26)
[    6.487989] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65
[    6.488539] F1 signature read @0x18000000=0x17214354
[    6.493859] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
[    6.494497] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[    6.574089] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[    6.639553] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[    6.639826] gpio tegra-gpio-aon wake69 for gpio=59(FF:3)
[    6.639888] gpio tegra-gpio-aon wake69 for gpio=59(FF:3)
[    6.639891] Enabling wake69
[    6.641086] wifi_platform_get_mac_addr
[    6.642960] Firmware up: op_mode=0x0005, MAC=00:04:4b:c6:ab:0b
[    6.647352] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob
[    6.647397] Skipping the clm download. len:0 memblk:          (null)
[    6.649749] dhd_preinit_ioctls pspretend_threshold for HostAPD failed  -23
[    6.654938] Firmware version = wl0: Aug 16 2021 23:50:51 version 7.35.349.111 (8083386 CY) FWID 01-ac463881
[    6.657486] dhd_interworking_enable: failed to set WNM info, ret=-23
[    6.787858] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : 
[    6.787861] P2P interface registered
[    6.816659] WLC_E_IF: NO_IF set, event Ignored
[    6.847411] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    8.550039] [09-13 03:00:14.616] wl_cfg80211_connect: Connectting with ee:b9:70:8a:df:50 channel (8) ssid "YZBSTC", len (6)

[    9.102783] [09-13 03:00:15.168] wl_notify_connect_status: wl_bss_connect_done succeeded with ee:b9:70:8a:df:50
[    9.119595]  wl_bss_connect_done : 
[    9.119599] Report connect result - connection succeeded
[    9.179172] [09-13 03:00:15.245] wl_notify_connect_status: wl_bss_connect_done succeeded with ee:b9:70:8a:df:50
[    9.199546] [09-13 03:00:15.265] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M1 of 4way
[    9.200010] [09-13 03:00:15.266] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M2 of 4way
[   10.205411] [09-13 03:00:16.271] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M1 of 4way
[   10.205594] [09-13 03:00:16.271] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M2 of 4way
[   11.202592] [09-13 03:00:17.268] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M1 of 4way
[   11.202774] [09-13 03:00:17.268] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M2 of 4way
[   12.205469] [09-13 03:00:18.271] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M1 of 4way
[   12.205669] [09-13 03:00:18.271] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M2 of 4way
[   12.217380] [09-13 03:00:18.283] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M3 of 4way
[   12.217578] [09-13 03:00:18.283] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M4 of 4way
[   12.268507] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   12.291236] dhd_ndo_add_ip: ndo ip addr add failed, ret = -23
[   12.291247] dhd_inet6_work_handler: Adding host ip for NDO failed -23
[   12.333397] ifidx:0 DHCP - DISCOVER [TX]
[   13.223107] [09-13 03:00:19.289] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M3 of 4way
[   13.223448] [09-13 03:00:19.289] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M4 of 4way
[   15.353011] ifidx:0 DHCP - DISCOVER [TX]
[   19.061289] tegradc 15210000.nvdisplay: blank - powerdown
[   19.118493] extcon-disp-state external-connection:disp-state: cable 47 state 0
[   19.118497] Extcon AUX1(HDMI) disable
[   19.145201] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd
[   19.145278] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
[   19.145785] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd
[   19.289051] tegradc 15210000.nvdisplay: blank - powerdown
[   19.289062] tegradc 15210000.nvdisplay: unblank
[   19.290036] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
[   19.290133] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
[   19.290213] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd
[   19.291605] Parent Clock set for DC plld2
[   19.295091] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m
[   19.298557] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID.
[   19.335759] extcon-disp-state external-connection:disp-state: cable 47 state 1
[   19.335762] Extcon AUX1(HDMI) enable
[   19.337692] tegradc 15210000.nvdisplay: unblank
[   22.074140] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.074150] Bluetooth: BNEP socket layer initialized
[   22.282742] tegradc 15210000.nvdisplay: unblank
[   23.934722] ifidx:0 DHCP - DISCOVER [TX]
[   31.825292] spmic-ldo0: disabling
[   31.825555] spmic-ldo1: disabling
[   31.825691] en-vdd-sd: disabling
[   31.825693] en-vdd-cam: disabling
[   31.825696] vdd-usb0-5v: disabling
[   31.825698] vdd-usb1-5v: disabling
[   31.825701] en-vdd-disp-3v3: disabling
[   31.825703] en-mdm-pwr-3v7: disabling
[   31.825705] en-vdd-disp-1v8: disabling
[   31.825707] en-vdd-cam-hv-2v8: disabling
[   31.825709] en-vdd-cam-1v2: disabling
[   31.825711] vdd-fan: disabling
[   31.825713] vdd-3v3: disabling
[   31.825715] en-vdd-vcm-2v8: disabling
[   31.825718] vdd-sys-bl: disabling
[   31.825721] en-vdd-sys: disabling
[   32.669296] ifidx:0 DHCP - DISCOVER [TX]
[   42.074804] ifidx:0 DHCP - DISCOVER [TX]
[   56.509625] ifidx:0 DHCP - DISCOVER [TX]
[   57.194827] dhd_ndo_remove_ip: ndo ip addr remove failed, ret = -23
[   57.194838] dhd_inet6_work_handler: Removing host ip for NDO failed -23
[   57.200469] [09-13 03:01:03.266] wl_cfg80211_disconnect: Reason 3
[   57.231295]  wl_is_linkdown : 
[   57.231299] Link down Reason : WLC_E_LINK
[   57.231312] [09-13 03:01:03.297] wl_notify_connect_status: link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from ee:b9:70:8a:df:50
[   57.233312]  wl_is_linkdown : 
[   57.233316] Link down Reason : WLC_E_DEAUTH
[   57.234076]  wl_is_linkdown : 
[   57.234080] Link down Reason : WLC_E_DEAUTH
[   57.234871]  wl_is_linkdown : 
[   57.234875] Link down Reason : WLC_E_DEAUTH
[   57.513364]  wl_cfg80211_disconnect : 
[   57.513378] Link down event is not received
[   59.263162] [09-13 03:01:05.329] wl_cfg80211_connect: Connectting with ee:b9:70:8a:df:50 channel (8) ssid "YZBSTC", len (6)

[   59.380945]  wl_notify_connect_status : 
[   59.380950] connect failed event=0 e->status 1 e->reason 0 
[   59.395200]  wl_bss_connect_done : 
[   59.395204] Report connect result - connection failed
[   59.662160] [09-13 03:01:05.728] wl_cfg80211_connect: Connectting with ee:b9:70:8a:df:94 channel (5) ssid "YZBSTC", len (6)

[   60.039089]  wl_notify_connect_status : 
[   60.039108] connect failed event=0 e->status 1 e->reason 0 
[   60.059411]  wl_bss_connect_done : 
[   60.059418] Report connect result - connection failed
[   60.314266] [09-13 03:01:06.380] wl_cfg80211_connect: Connectting with ee:b9:70:8a:df:78 channel (5) ssid "YZBSTC", len (6)

[   60.500260]  wl_notify_connect_status : 
[   60.500273] connect failed event=0 e->status 1 e->reason 0 
[   60.519696]  wl_bss_connect_done : 
[   60.519702] Report connect result - connection failed
[   60.781883] [09-13 03:01:06.848] wl_cfg80211_connect: Connectting with ee:b9:70:8a:df:64 channel (5) ssid "YZBSTC", len (6)

[   60.938701]  wl_notify_connect_status : 
[   60.938720] connect failed event=0 e->status 1 e->reason 0 
[   60.961313]  wl_bss_connect_done : 
[   60.961320] Report connect result - connection failed
[   61.212526] [09-13 03:01:07.278] wl_cfg80211_connect: Connectting with ee:b9:70:8a:df:34 channel (5) ssid "YZBSTC", len (6)

[   61.336026]  wl_notify_connect_status : 
[   61.336034] connect failed event=0 e->status 1 e->reason 0 
[   61.351006]  wl_bss_connect_done : 
[   61.351009] Report connect result - connection failed
[   61.611912] [09-13 03:01:07.678] wl_cfg80211_connect: Connectting with ec:b9:70:7a:de:dc channel (44) ssid "YZBSTC", len (6)

[   61.717542]  wl_notify_connect_status : 
[   61.717551] connect failed event=0 e->status 1 e->reason 0 
[   61.734805]  wl_bss_connect_done : 
[   61.734810] Report connect result - connection failed
[   62.065818] [09-13 03:01:08.132] wl_cfg80211_connect: Connectting with ee:b9:70:8a:df:68 channel (5) ssid "YZBSTC", len (6)

[   62.687852]  wl_notify_connect_status : 
[   62.687862] connect failed event=0 e->status 1 e->reason 0 
[   62.708994]  wl_bss_connect_done : 
[   62.709004] Report connect result - connection failed
[   64.494105] [09-13 03:01:10.560] wl_cfg80211_connect: Connectting with ee:b9:70:8a:df:50 channel (8) ssid "YZBSTC", len (6)

[   64.632370] [09-13 03:01:10.698] wl_notify_connect_status: wl_bss_connect_done succeeded with ee:b9:70:8a:df:50
[   64.651250]  wl_bss_connect_done : 
[   64.651256] Report connect result - connection succeeded
[   64.677423] [09-13 03:01:10.743] wl_notify_connect_status: wl_bss_connect_done succeeded with ee:b9:70:8a:df:50
[   64.732918] [09-13 03:01:10.799] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M1 of 4way
[   64.733597] [09-13 03:01:10.799] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M2 of 4way
[   64.743854] [09-13 03:01:10.810] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M3 of 4way
[   64.744086] [09-13 03:01:10.810] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M4 of 4way
[   64.826480] dhd_ndo_add_ip: ndo ip addr add failed, ret = -23
[   64.826491] dhd_inet6_work_handler: Adding host ip for NDO failed -23
[   64.865432] ifidx:0 DHCP - DISCOVER [TX]
[   67.880657] ifidx:0 DHCP - DISCOVER [TX]
[   71.217368] ifidx:0 DHCP - DISCOVER [TX]